
Punching the Drain Opening
The drain opening is punched into the flat steel blank before the sides are formed.
10% off eligible orders of $60+
LORDEAR STAINLESS STEEL COLLECTION
See how we shape stainless steel for the way you prep, rinse, and clean up.
Explore Stainless Steel Sinks
At Lordear, making everyday living better starts with care at each stage of production. Our fabricated stainless steel sinks take shape through skilled handwork and machine precision. Technicians align the joints, inspect welded seams and refine the surface before each sink is cleaned and packed. From the strength of a seam to the feel of a finished corner, these details shape the quality you use every day.

The drain opening is punched into the flat steel blank before the sides are formed.

The blank is trimmed and notched to prepare the edges for folding.

The edges are folded at the bending station to establish the basin walls.

The folded sheet takes its bowl shape, with the edges ready for joining.

Protective film is removed from the areas that need to be joined and finished.

Technicians align and tack-weld the corners to hold the bowl together for seam welding.

Computer-controlled welding joins the aligned edges. The welded seams are then inspected.

Smaller corner joints are welded with close attention to the meeting edges.

The joint edges are trimmed in preparation for the next joining stage.

On welded double-bowl models, the two basins are joined along the center seam.

Mounting attachment points are positioned and spot-welded to the sink.

Welded corners and seams are ground smooth to blend into the surrounding steel.

Sanding blends surface marks. On brushed models, technicians refine the straight grain across the finished steel.

On equipped models, pads are attached to the outer walls and underside to help reduce noise.

On equipped models, a water-based coating is applied to the outside of the basin and left to dry.

The basin is cleaned to remove residue from fabrication and finishing.

The sink is protected for shipment and packed with the accessories and installation materials supplied with its model.
A fabricated sink is built by folding a flat steel sheet and welding the seams. A drawn sink is formed by pressing a sheet into a die. Steel thickness and bowl shape vary with the design and model.
Before ordering, check the sink dimensions, the minimum cabinet width and your countertop cutout.
Look for these features on select Lordear stainless steel models.

Sound-dampening pads help reduce noise from running water and cookware during cleanup.

Heavy-duty 16-gauge T304 stainless steel resists corrosion and stands up to everyday use.

Four X-shaped channels and a sloped area around the drain help guide water out of the bowl.

Rounded interior corners make it easier to wipe away residue after use.